Spray rubber provides a high-quality and flexible way to seal leaks and cracks on most building surfaces. It creates a durable and flexible protective film that reliably prevents moisture penetration, isolates the surface from water and protects against rust and corrosion. Can also be used on vertical surfaces.

Characteristics
creates a flexible film
prevents moisture penetration, rust and corrosion
suitable for vertical and horizontal surfaces
easy and quick application
starts setting after 20 to 30 minutes (surface peel)
complete hardening after 72 hours depending on the layer
average consumption 0.8 m2 per can

Application
concrete, bitumen and asphalt surfaces
PVC, ceramic and wooden surfaces
metal surfaces including galvanized aluminum surfaces

Application
The substrate must be cleaned as best as possible of grease, dust and loose particles. Shake the can well for at least 1 minute before application. It is recommended to apply 2 coats, applying 8 to 20 cm from the surface. The first coat should be thinner. After approximately 15 to 30 minutes, apply a second, thicker coat.

Hazard identification

Signal word: DANGER

H222/229 - Extremely flammable aerosol. Pressurized container: may burst if heated.
H319 - Causes serious eye irritation.
H315 - Causes skin irritation.
H335 - May cause respiratory irritation.
H373 - May cause damage to organs through prolonged or repeated exposure.

P102 - Keep out of reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Do not pierce or burn, even after use.
P305/351/338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P410/412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
P501 - Dispose of contents/container ...

Ingredients:propane, titanium dioxide, hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics, reaction mixture of ethylbenzene (6-26%), m-xylene and p-xylene, butane

Always follow the information on the product label.